Create Authen_Enable Method_List_Name <String 15 - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# show authen_login method_list_name login_list_1
Command: show authen_login method_list_name login_list_1
Method List Name
----------------
login_list_1
DGS-3120-24TC:admin#
5-12 create authen_enable
Description
This command is used to create a user-defined method list of authentication methods for
promoting user's privilege to Admin level.
Format
create authen_enable method_list_name <string 15>
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# create authen_enable method_list_name enable_list_1
Command: create authen_enable method_list_name enable_list_1
Success.
DGS-3120-24TC:admin#
5-13 config authen_enable
Description
This command is used to configure a user-defined or default method list of authentication methods
for promoting user's privilege to Admin level. The sequence of methods will affect the altercation
result. For example, if the sequence is tacacs+ first, then tacacs and local_enable, when user try
to promote user's privilege to Admin level, the authentication request will be sent to the first server
host in tacacs+ built-in server group. If the first server host in tacacs+ group is missing, the
authentication request will be sent to the second server host in tacacs+ group, and so on. If all
Priority Method Name
-------- ---------------
1 tacacs+
2 tacacs
3 mix_1
4 local
Comment
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
72