D-Link DGS-3120-24PC Manual page 314

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#dir
Command: dir
Directory of /unit2:/c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 drw- 0
2 CFG(*) -rw- 29661
3 RUN(*) -rw- 4879040
4 d--- 0
29618 KB total (24727 KB free)
(*) -with boot up info
DGS-3120-24TC:admin#del 12 recursive
Command: del 12 recursive
Success.
DGS-3120-24TC:admin#dir
Command: dir
Directory of /unit2:/c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 CFG(*) -rw- 29661
2 RUN(*) -rw- 4879040
3 d--- 0
29618 KB total (24727 KB free)
(*) -with boot up info
DGS-3120-24TC:admin#
33-9 erase
Description
This command is used to delete a file stored in the file system.
System will prompt if the target file is a FW or configuration whose type is boot up.
Format
erase {{unit <unit_id>} <drive_id>} <pathname>
Parameters
unit - (Optional) Specify a unit ID if in the stacking system. If not specified, it refers to the master
unit.
<unit_id> - Enter the unit ID here.
Update Time
2000/04/02 06:02:04 12
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
Update Time
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
310
Name
Name