D-Link DGS-3120-24PC Manual page 629

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# config safeguard_engine state enable utilization rising 50
falling 30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30
trap_log enable
Success.
DGS-3120-24TC:admin#
68-2 show safeguard_engine
Description
This command is used to show safeguard engine information.
Format
show safeguard_engine
Parameters
None.
Restrictions
None.
Example
To show safeguard_engine information:
DGS-3120-24TC:admin# show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State
Safeguard Engine Current Status :
=======================================================
CPU Utilization Information:
Rising Threshold
Falling Threshold :
Trap/Log State
Mode
DGS-3120-24TC:admin#
Note: Safeguard engine current status has two modes: exhausted and normal mode.
: Disabled
Normal Mode
: 30%
20%
: Disabled
: Fuzzy
625