D-Link DGS-3120-24PC Manual page 553

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
------------------------------------------------------------
Information OAMPDU TX
Information OAMPDU RX
Unique Event Notification OAMPDU TX
Unique Event Notification OAMPDU RX
Duplicate Event Notification OAMPDU TX: 0
Duplicate Event Notification OAMPDU RX: 0
Loopback Control OAMPDU TX
Loopback Control OAMPDU RX
Variable Request OAMPDU TX
Variable Request OAMPDU RX
Variable Response OAMPDU TX
Variable Response OAMPDU RX
Organization Specific OAMPDUs TX
Organization Specific OAMPDUs RX
Unsupported OAMPDU TX
Unsupported OAMPDU RX
Frames Lost Due To OAM
DGS-3120-24TC:admin#
55-3 clear ethernet_oam ports
Description
This command is used to clear Ethernet OAM information.
Format
clear ethernet_oam ports [<portlist> | all] [event_log | statistics]
Parameters
<portlist> - Specify a range of Ethernet OAM ports to be cleared.
all - Specify to clear all Ethernet OAM ports.
event_log - Specify to clear Ethernet OAM event log information.
statistics - Specify to clear Ethernet OAM statistics.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear port 1 OAM statistics:
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
549