Server_Host [ <Ipaddr> | ]Protocol [Tacacs | Xtacacs | Tacacs+| Radius] - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined authentication server group:
DGS-3120-24TC:admin# create authen server_group mix_1
Command: create authen server_group mix_1
Success.
DGS-3120-24TC:admin#
5-19 config authen server_group
Description
This command is used to add or remove an authentication server host to or from the specified
server group. Built-in server group "tacacs", "xtacacs", "tacacs+", "radius" accepts the server host
with the same protocol only, but user-defined server group can accept server hosts with different
protocols.
Format
config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host [ <ipaddr> | ]protocol [tacacs | xtacacs | tacacs+| radius]
Parameters
server_group - User-defined server group.
tacacs - Built-in server group "tacacs".
xtacacs - Built-in server group "xtacacs".
tacacs+ - Built-in server group "tacacs+".
radius - Built-in server group "radius".
<string 15> - Enter the server group name here. This value can be up to 15 characters long.
add - Add a server host to a server group.
delete - Remove a server host from a server group.
server_host - Server host's IP address.
<ipaddr> - Enter the server host IP address here.
protocol - Specify the authentication protocol used.
tacacs - Specify that the TACACS authentication protocol will be used.
xtacacs - Specify that the XTACACS authentication protocol will be used.
tacacs+ - Specify that the TACACS+ authentication protocol will be used.
radius - Specify that the radius authentication protocol will be used.
Restrictions
Only Administrator-level users can issue this command.
Example
To add an authentication server host to an server group:
77