D-Link DGS-3120-24PC Manual page 127

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#
Command: create port_group id 2 name group2
Success.
DGS-3120-24TC:admin#
7-9 config port_group
Description
This command is used to add or delete a port list to a port group.
Format
config port_group [id <value 1-64> | name <name 16 >] [add | delete] [<portlist> |all]
Parameters
id - Specify the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - Specify the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
add - Add a port list to this port group.
delete - Delete a port list from this port group.
<portlist> - Enter a list of ports used for the configuration here.
all - Specify that all the ports will be used for this configuration.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Add port list "1-3" to the port group which ID is "2":
DGS-3120-24TC:admin#
Command: config port_group id 2 add 1:1-1:3
Success.
DGS-3120-24TC:admin#
7-10 delete port_group
Description
This command is used to delete port group.
Format
delete port_group [id <value 1-64> | name <name 16>]
create port_group id 2 name group2
config port_group id 2 add 1:1-1:3
123