D-Link DGS-3120-24PC Manual page 524

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To show STP:
DGS-3120-24TC:admin#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
New Root Trap
Topology Change Trap : Enabled
NNI BPDU Address
DGS-3120-24TC:admin#
52-5 create stp instance_id
Description
This command is used to create an MST Instance without mapping the corresponding VLANs.
Format
create stp instance_id <value 1-15>
Parameters
instance_id - Specify the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-15> - Enter the MSTP instance ID here. This value must be between 1 and 15.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create MSTP instance:
: Enabled
: RSTP
: 25
: 2
: 15
: 20
: 6
: Disabled
: Enabled
: dot1d
520