Show Account - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<username> - Enter the user name of the account that has been defined.
encrypt - (Optional) Specify that the password will be encrypted.
plain_text - Select to specify the password in plain text form.
sha_1 - Select to specify the password in the SHA-I enacrpted form.
<password> - The password for the user account. The length for of password in plain-text
form and in encrypted form are different. For the plain-text form, passwords must have a
minimum of 0 character and can have a maximum of 15 characters. For the encrypted
form password, the length is fixed to 35 bytes long. The assword is case-sensitive.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the user password of "dlink" account:
DGS-3120-24TC:admin# config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3120-24TC:admin#
To configure the user password of "administrator" account:
DGS-3120-24TC:admin# config account administrator encrypt sha_1
*@&cRDtpNCeBiq15KOQsKVyrA0sAiCIZQwq
Command: config account administrator encrypt sha_1
*@&cRDtpNCeBiq15KOQsKVyrA0sAiCIZQwq
Success.
DGS-3120-24TC:admin#
12-3

show account

Description
This command is used to display user accounts that have been created.
Format
show account
Parameters
None.
139