D-Link DGS-3120-24PC Manual page 156

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
processing will be disabled. By enable this automatic configuration, the link local address will be
automatically configured and IPv6 processing will be started.
Format
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the IP interface for IPv6 link local automatic:
DGS-3120-24TC:admin#enable ipif_ipv6_link_local_auto newone
Command: enable ipif_ipv6_link_local_auto newone
Success.
DGS-3120-24TC:admin#
12-20 disable ipif_ipv6_link_local_auto (EI Mode Only)
Description
This command is used to disable the auto configuration of link local address when no IPv6 address
are configured.
Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the IP interface for IPv6 link local automatic:
152