D-Link DGS-3120-24PC Manual page 611

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
priority queues available. They are numbered between 0 (the lowest priority) and 7 (the
highest priority).
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1p user priority:
DGS-3120-24TC:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DGS-3120-24TC:admin#
65-10 show 802.1p user_priority
Description
This command is used to display 802.1p user priority for ports.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
Example
To display the 802.1p user priority:
607