Show Utilization Flash; Clear Counters - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show utilization dram
Command: show utilization dram
Unit 1 DRAM utilization :
Total DRAM
Used DRAM
Utilization
CTRL+C ESC q Quit
54-5

show utilization flash

Description
This command is used to show the flash memory utilization.
Format
show utilization flash {unit <unit_id>}
Parameters
unit - (Optional) Specify the Switch unit ID to be displayed.
<unit_id> - Enter teh Switch unit ID used here.
Restrictions
None.
Example
To display FLASH utilization:
DGS-3120-24TC:admin#show utilization flash
Command: show utilization flash
Unit 1 Flash Memory Utilization :
Total Flash
Used Flash
Utilization
CTRL+C ESC q Quit
54-6

clear counters

Description
This command is used to clear the Switch's statistics counters.
: 131072 KB
: 128128 KB
: 97 %
SPACE n Next Page p
: 29618 KB
: 5422 KB
: 18 %
SPACE n Next Page p
541
Previous Page r Refresh
Previous Page r Refresh