D-Link DGS-3120-24PC Manual page 358

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
35-32 show mld_snooping forwarding
Description
This command is used to display the Switch's current MLD snooping forwarding table. It provides
an easy way for users to check the list of ports that the multicast group that comes from specific
sources will be forwarded to. The packet comes from the source VLAN. They will be forwarded to
the forwarding VLAN. The MLD snooping further restricts the forwarding ports.
Format
show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current MLD snooping forwarding table
entries of the Switch.
Restrictions
None.
Example
To show all MLD snooping forwarding entries located on the Switch.
DGS-3120-24TC:admin# show mld_snooping forwarding
Command: show mld_snooping forwarding
VLAN Name : default
Source IP : 2001::1
Multicast Group: FE1E::1
Port Member : 2,7
VLAN Name : default
Source IP : 2001::2
Multicast Group: FF1E::1
Port Member : 5
Total Entries : 2
DGS-3120-24TC:admin#
354