Enable Sntp - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To show SNTP:
DGS-3120-24TC:admin#show sntp
Command: show sntp
Current Time Source
SNTP Status
IPv4 Primary SNTP Server
IPv4 Secondary SNTP Server: None
IPv6 Primary SNTP Server
IPv6 Secondary SNTP Server: None
SNTP Poll Interval
DGS-3120-24TC:admin#
84-4

enable sntp

Description
This command is used to turn on SNTP support.
Format
enable sntp
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNTP:
: System Clock
: Disabled
: None
: None
: 720 sec
747