Printing Problems - Fuji Xerox DocuPrint M355 df User Manual

Printing Problems

NOTE:
• If Panel Lock Set is set to Enable, you need to enter the four digit password to enter the Admin Menu menu.
Problem
Job did not print or incorrect
characters printed.
Print media misfeeds or multiple
feeds occur.
The envelope is creased after
printed.
Page breaks in unexpected
places.
342
Troubleshooting
Action
Ensure that the top menu appears on the LCD panel before you send a job to print.
Press the (System) button to return to the top menu.
Ensure that the print media is loaded in the printer. Press the
return to the top menu.
Verify that the printer is using the correct page description language (PDL).
Verify that you are using the correct print driver.
Ensure that the correct USB cable, Ethernet cable or wireless printer adapter is
securely connected to the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Check the printer's interface from the
Determine the host interface you are using. Print a Panel Settings page to verify that
the current interface settings are correct.
Ensure that the print media you are using meets the specifications for your printer.
See also:
• "Usable Print Media" on page 125
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Ensure that the width and length guides of the print media sources are adjusted
correctly.
Ensure that the standard 250 sheet tray, the optional 250 sheet feeder, or the bypass
tray is securely inserted.
Do not overload the standard 250 sheet tray, the optional 250 sheet feeder, or the
bypass tray.
Do not force print media into the bypass tray when you load it; otherwise, it may skew
or buckle.
Ensure that the print media is not curled.
Face the recommended print side up.
See also:
• "Loading Print Media" on page 131
Turn the print media over or around and try printing again to see if feeding improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream before loading the print media.
Load print media only when the standard 250 sheet tray, the optional 250 sheet
feeder, or the bypass tray is empty.
Wipe the feed roller in the standard 250 sheet tray, the optional 250 sheet feeder, or
the bypass tray with a cloth moistened with water.
See also:
• "Cleaning Inside the Printer" on page 378
Make sure that the envelope is loaded in the bypass tray as instructed in
Envelope in the Bypass Tray" on page
Increase the value for the Timeout on the operator panel or CentreWare Internet
Services.
Admin Menu menu.
139.
(System) button to
"Loading