Specifying The Fax Initial Settings From The Operator Panel; Setting Your Region - Fuji Xerox DocuPrint M355 df User Manual

3
Click Fax Configuration.
4
Follow the instructions displayed on the screen.
Available settings are:
• Region
• Line Type
• Dial Type
• Receive Mode
• DRPD Pattern
(This setting is available only when a distinctive ring service is installed on your telephone line by your
telephone company.)
• Company Name
• FAX Number
NOTE:
• To make initial settings from the printer operator panel, see
on page 222.
 Specifying the Fax Initial Settings From the Operator
Panel

Setting Your Region

You need to set the region where your printer is used for using the fax service on the printer.
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Fax Settings, and then press the
4
Select Region, and then press the
5
Select the region where the printer is used, and then press the
6
Select Start, and then press the
The printer restarts automatically to apply the settings.
NOTE:
• When you configure the region setting, the information registered to the device is initialized.
222
Faxing

"Specifying the Fax Initial Settings From the Operator Panel"

button.
button.
button.
button.
button.