2-Sided; Auto Exposure - Fuji Xerox DocuPrint M355 df User Manual

 2-Sided
To make duplex copies with the specified binding position.
1
Select 2-Sided, and then press the
2
Select the desired setting, and then press the
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
1->1-Sided*
1->2-Sided
2->1-Sided
2->2-Sided
1->2 Short Edge
2->1 Short Edge
2->2 Short Edge
When you are using the document glass and it is set to 1->2-Sided or 2->2-Sided, the display prompts you
for another page after pressing the
If you want to place a new document, press the
a
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the
If you finish copying, select No.
b
NOTE:
• When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set Document
Size to the same size as the document.
 Auto Exposure
To suppress the background of the original to enhance text on the copy.
1
Select Auto Exposure, and then press the
2
Select On, and then press the
172
Copying
button.
button.
Select 1-sided or 2-sided and specify binding position for the 2 sided copy.
(Start) button.
button to select Yes, and then press the
button.
button.
button.
button.