Assigning An Ip Address (For Ipv4 Mode) - Fuji Xerox DocuPrint M355 df User Manual

 Assigning an IP Address (for IPv4 Mode)
NOTE:
• When you assign an IP address manually in IPv6 mode, use the CentreWare Internet Services. To display the CentreWare
Internet Services, use the link local address. To check a link local address, see
Page" on page 84.
• Assigning an IP address is considered as an advanced function and is normally done by a system administrator.
• Depending on the address class, the range of the IP address assigned may be different. On Class A, for example, an IP
address in the range from
your system administrator.
You can assign the IP address by using the operator panel.
1
Turn on the printer.
2
Ensure that Ready message appears on the LCD panel.
3
On the operator panel, press the
4
Select Admin Menu, and then press the
5
Select Network Setup, and then press the
6
Select TCP/IP, and then press the
7
Select IPv4, and then press the
8
Select Get IP Address, and then press the
9
Select Panel, and then press the
10
Ensure that the message This Setting Becomes Effective after Restart appears, and then press
the (Back) button.
11
Select IP Address, and then press the
The cursor is located at the first octet of the IP address.
12
Enter the value of the IP address using the number pad.
13
Press the button.
The cursor moves to the next octet.
14
Repeat steps 12 to
15
Ensure that the message This Setting Becomes Effective after Restart appears, and then press
the (Back) button.
16
Select Subnet Mask, and then press the
The cursor is located at the first octet of the subnet mask.
17
Enter the value of the subnet mask using the number pad.
18
Press the button.
The cursor moves to the next octet.
19
Repeat steps 17 to
20
Ensure that the message This Setting Becomes Effective after Restart appears, and then press
the (Back) button.
21
Select Gateway Address, and then press the
The cursor is located at the first octet of the gateway address.
0.0.0.0 to 127.255.255.255
(System) button.
button.
button.
button.
13 to set all of the digits in the IP address, and then press the
18 to set the subnet mask, and then press the
will be assigned. For assignment of IP addresses, contact
button.
button.
button.
button.
button.
button.
Printer Connection and Software Installation
"Printing and Checking the System Settings
button.
button.
83