Setting Copy Options; Id Card Copy - Fuji Xerox DocuPrint M355 df User Manual

Setting Copy Options

Set the following options for the current copy job before pressing the
For details about making copies, see
From the DADF" on page
NOTE:
• The copy options automatically return to their default status after the next copy is performed or the auto clear timer is expired.
This section includes:
• "ID Card Copy" on page 170
• "Select Tray" on page 171
• "Lighten/Darken" on page 171
• "2-Sided" on page 172
• "Auto Exposure" on page 172
• "Collated" on page 173
• "Sharpness" on page 173
• "Reduce/Enlarge" on page 174
• "Document Size" on page 175
• "Document Type" on page 175
• "N-Up" on page 176
• "Margin Top/Bottom" on page 177
• "Margin Left/Right" on page 177
• "Margin Middle" on page 177
 ID Card Copy
You can copy both sides of an ID card on one side of a single sheet of paper in its original size by selecting ID Card
Copy on the operator panel. This feature helps to show both sides of an ID card in one page in its original size.
NOTE:
• ID Card Copy is available only for the document glass.
1
Place an ID card face down on the document glass, and close the document cover.
For details about loading a document, see
2
Select ID Card Copy.
3
Select On.
4
Specify the copy settings below as required.
• Select Tray
• Lighten/Darken
• Auto Exposure
• Sharpness
For details, see "Setting Copy Options" on page
5
Press the (Start) button to begin copying.
After the front side of the ID card is scanned, the display prompts you to turn over the card.
To scan the back side of the ID card, select Yes and turn the ID card over.
a
Select Continue, and then press the
To finish copying, select No.
b
170
Copying
"Making Copies From the Document Glass" on page 167
169.
"Making Copies From the Document Glass" on page
(Start) button to begin copying.
170.
button.
and "Making Copies
167.