Sending A Fax Using Speed Dial - Fuji Xerox DocuPrint M355 df User Manual

 Sending a Fax Using Speed Dial
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Loading an Original Document" on page 225
2
To enter the speed dial number, do one of the followings after pressing the
• Select Fax to, and then press the
• Press the (Speed Dial) button.
3
Enter the speed dial number between 001 and 200 using the number pad, and then press the
The corresponding entry's name briefly displays on the LCD panel. To confirm the name again, press the
button.
4
Adjust the document resolution to suit your fax needs.
See also:
• "Adjusting the Document Resolution" on page 227
• "Adjusting the Document Contrast" on page 227
5
Press the (Start) button.
The document scans into the memory.
When the document is placed on the document glass, the display prompts you for another page. Select Yes to
add more documents or No to begin sending the fax immediately, and then press the
The fax number stored in the speed dial location is automatically dialed. The document is sent when the remote
fax machine answers.
NOTE:
• Using the asterisk (*) in the first digit, you can send a document to multiple locations. For example, if you enter 00*, you
can send a document to the locations registered between 001 and 009.
button. Select Speed Dial, and then press the
(Fax) button:
button.
button.
button.
Faxing
239