• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
2 mm*/0.1 inch*
0 - 50 mm/0.0 - 2.0 inch
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0 mm*/0.0 inch*
0 - 50 mm/0.0 - 2.0 inch
• TIFF File Format
Purpose:
To specify the default TIFF file format.
Values:
*
TIFF V6
TTN2
• Image Compression
Purpose:
To specify the image compression level.
Values:
Higher
*
Normal
Lower
• Max Email Size
Purpose:
To specify the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes. The default
is 2048 K bytes.
Fax Defaults
Purpose:
To modify the defaults for the Fax menu.
NOTE:
•
The FAX service cannot be used unless you set up a region code under Region. If Region is not set up, a message Set
the Region Code appears on the display.
•
Values marked by an asterisk (*) are the factory default menu settings.
Specify the value in increments of 1 mm/0.1 inch.
Specify the value in increments of 1 mm/0.1 inch.
Sets the default TIFF file format to TIFF V6.
Sets the default Tiff file format to TTN2.
Sets the image compression level to Higher.
Sets the image compression level to Normal.
Sets the image compression level to Lower.
Using the Operator Panel Menus and Keypad
299