Print From Usb Defaults - Fuji Xerox DocuPrint M355 df User Manual

Print from USB Defaults

To modify the defaults for the Print from USB menu.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Select Tray
Purpose:
To specify the input tray.
Values:
Bypass Tray
*
Tray 1
Tray 2
NOTE:
• Tray 2 is available only when the optional 250 sheet feeder is installed.
• 2-Sided
Purpose:
To print on both sides of a sheet of paper.
Values:
*
1-Sided
2-Sided
2-Sided Binding Short
• Layout
Purpose:
To specify the output layout.
Values:
*
1Up
2Up
4Up
• PDF Password
Purpose:
To enter the password when you print the secure PDF job.
Values:
Enter PDF Password
The paper is fed from the bypass tray.
The paper is fed from the standard 250 sheet tray.
The paper is fed from the optional 250 sheet feeder.
Prints on one side of a sheet of paper.
Prints on both sides of a sheet of paper to be bound by long edge.
Prints on both sides of a sheet of paper to be bound by short edge.
Prints one page on one side of a sheet of paper.
Prints two pages on one side of a sheet of paper.
Prints four pages on one side of a sheet of paper.
Enter the password to print the secure PDF job.
Using the Operator Panel Menus and Keypad
301