Using The Lpr Command; Using The Ftp Command - Fuji Xerox DocuPrint M355 df User Manual

Using the lpr command

NOTE:
• For Windows Vista or later, enable the lpr command first. The following procedure uses Windows 7 as an example.
Click Start → Control Panel → Programs → Turn Windows features on or off.
a
In the Windows Features dialog box, select the LPR Port Monitor check box under Print and Document
b
Services.
In the command prompt, enter the lpr command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
C:\> lpr -S 192.168.1.100 -P lp event.pdf

Using the ftp command

In the command prompt, enter the ftp command as described in the following example:
Example: Printing "event.pdf" when the printer's IP address is 192.168.1.100.
C:\> ftp 192.168.1.100
Connected to 192.168.1.100.
220 FUJI XEROX DocuPrint XXXX
User (192.168.1.100:(none)):
331 Password required
Password:
230 Logged in
ftp> bin
200 Command successful
ftp> put event.pdf
200 Command successful
150 Opening data connection
226 Transfer complete
ftp: xxxxx bytes sent in xxxSeconds xxxxxkbytes/sec.
ftp>
148
Printing Basics