Prefix Dial - Fuji Xerox DocuPrint M355 df User Manual

Option
Prefix Dial Num
Discard Size
ECM
Extel Hook Thresh
Modem Speed
Display Manual Fax Recipients
Region
Fax Activity
Fax Transmit
Fax Broadcast
Fax Protocol

• Prefix Dial

NOTE:
• Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must do
the following from the operator panel.
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Fax Settings, and then press the
4
Select Line Type, and then press the
5
Select PBX, and then press the
6
Select Prefix Dial, and then press the
7
Select On, and then press the
8
Select Prefix Dial Num, and then press the
9
Enter an up-to-five-digit prefix number from 0
10
Reboot the printer by turning the power switch off and then on.
248
Faxing
Description
You can set a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PBX).
When receiving a document as long as or longer than the paper installed in
your printer, you can set the printer to discard any excess at the bottom of the
page. If the received page is outside the margin you set, it will print on two
sheets of paper at the actual size. When the document is within the margin
and Discard Size is set to Auto Reduction, the printer reduces the
document to fit it onto the appropriate sized paper and discard does not
occur. If Discard Size is set to other than Auto Reduction, the data
within the margin will be discarded.
You can set whether to enable or disable the ECM (Error Correction Mode).
You can select the external telephone hook detection threshold for the
condition in which a telephone line is not being used.
You can set the modem speed.
To set whether to display the fax number of the recipient when manually
sending a fax.
You can select the region where the printer is used.
You can change this setting when:
• No jobs in operation
• No fax jobs waiting in the memory
You can set whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.
You can set whether to print a transmission result after a fax transmission.
You can set whether to print a transmission result after a fax broadcast to
multiple locations.
You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
button.
button.
button.
button.
button.
button.
button.
9, *, and #, and then press the
–
button.