Collated; Sharpness - Fuji Xerox DocuPrint M355 df User Manual

 Collated
To sort the copy output: For example, if you make two copies of three page documents, one complete three page
document will be printed followed by the second complete document.
NOTE:
• You can collate more pages when optional 512MB memory is installed.
1
Select Collated, and then press the
2
Select the desired setting, and then press the
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Off
On
Auto*
When you are using the document glass and it is set to On, the display prompts you for another page.
If you want to place a new document, press the
a
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the
If you finish copying, select No.
b
 Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original.
1
Select Sharpness, and then press the
2
Select the desired setting, and then press the
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Sharper
Normal*
Softer
button.
Does not copy in collated order.
Copies in collated order.
Only the documents loaded from DADF are copied in collated order.
button.
Makes the copy image sharper than the original.
The clarity of the image is the same as the original.
Makes the copy image softer than the original.
button.
button to select Yes, and then press the
button.
button.
button.
173
Copying