Sending A Delayed Fax - Fuji Xerox DocuPrint M355 df User Manual

Sending a Delayed Fax

The Delayed Start mode can be used to save scanned documents for transmission at a specified time to take
advantage of lower long distance rates.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Loading an Original Document" on page 225
2
Press the (Fax) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Adjusting the Document Resolution" on page 227
• "Adjusting the Document Contrast" on page 227
4
Select Delayed Start, and then press the
5
Select On, and then press the
6
Enter the start time using the number pad or select the start time using the
button.
7
Select Fax to, and then press the
8
Select Keypad, and then press the
9
Enter the number of the remote machine using the number pad, and then press the
You can also use speed or group dial numbers.
See also:
• "Automatic Dialing" on page 238
10
Press the (Start) button to scan data.
Once Delayed Start mode is activated, your printer stores all of the documents to be faxed into its memory and
sends them at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
NOTE:
• If you turn off and on the printer, the stored documents are sent as soon as the printer is activated.
button.
button.
button.
button.
or button, and then press the
button.
Faxing
231