Panel Lock Function; Enabling The Panel Lock; Disabling The Panel Lock - Fuji Xerox DocuPrint M355 df User Manual

Panel Lock Function

This feature prevents unauthorized users from changing settings made by the administrator. However, you can
select settings for individual print jobs using the print driver.
This section includes:
• "Enabling the Panel Lock" on page 308
• "Disabling the Panel Lock" on page 308
NOTE:
• Disabling the operator panel menus does not prevent access to the Secure Print, Sample Print and Tray Settings
menus.
 Enabling the Panel Lock
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Secure Settings, and then press the
4
Select Panel Lock, and then press the
5
Select Panel Lock Set, and then press the
6
Select Enable, and then press the
7
Enter the new password, and then press the
8
Re-enter the password to confirm the password that you entered, and then press the
NOTE:
• The factory-default panel password is 0000.
• Be sure to remember the password. The procedure described below allows you to reset the password, but the settings for
Address Book are cleared.
• Turn off the printer. Then, while holding the
• If you change the password while Panel Lock Set is Enable, perform steps
press the button. Perform steps
password, and then press the
 Disabling the Panel Lock
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Enter the password, and then press the
4
Select Secure Settings, and then press the
5
Select Panel Lock, and then press the
6
Select Panel Lock Set, and then press the
7
Select Disable, and then press the
8
Enter the current password, and then press the
308
Using the Operator Panel Menus and Keypad
button.
button.
button.
button.
button.
(System)
3 to 4. Select Change Password, and then press the
button. Perform steps 7 and 8. This will change the password.
button.
button.
button.
button.
button.
button.
button.
button, turn on the printer.
1 to 2. Enter the current password, and then
button.
button.
button. Enter the current