Installing Print Driver On Computers Running Windows; Identifying Print Driver Pre-Install Status (For Network Connection Setup) - Fuji Xerox DocuPrint M355 df User Manual

Installing Print Driver on Computers Running
Windows
This section includes:
• "Identifying Print Driver Pre-install Status (For Network Connection Setup)" on page 85
• "Inserting the CD-ROM" on page 86
• "USB Connection Setup" on page 87
• "Network Connection Setup" on page 89
• "Setting Up for Shared Printing" on page 94
NOTE:
• The fax driver is installed with the PCL 6 driver.
 Identifying Print Driver Pre-install Status (For Network
Connection Setup)
Before installing the print driver on your computer, print the System Settings page to check the IP address of your
printer.
This section includes:
• "The Operator Panel" on page 85
• "Changing the Firewall Settings Before Installing Your Printer" on page 86
The Operator Panel
1
Press the (System) button.
2
Select Report / List, and then press the
3
Select System Settings, and then press the
The System Settings page is printed.
4
Find the IP address next to IP Address under Network Setup on the System Settings page.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then print the
System Settings page again.
If the IP address is not resolved automatically, see
button.
button.
"Assigning an IP Address (for IPv4 Mode)" on page
Printer Connection and Software Installation
83.
85