Interval Timer; Line Monitor; Ring Tone Volume; Line Type - Fuji Xerox DocuPrint M355 df User Manual

• Line Monitor

Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a
connection is made.
Values:
Off
Min
*
Middle
Max

• Ring Tone Volume

Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal
speaker when Ans Select is set to TEL/FAX Mode.
Values:
Off
Min
Middle
*
Max

• Line Type

Purpose:
To select the default line type.
Values:
*
PSTN
PBX

• Dialing Type

Purpose:
To select the dialing type.
Values:
*
PB
DP(10PPS)
DP(20PPS)

• Interval Timer

Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8
seconds.

• Number of Redial

Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 9.
If you enter 0, the printer will not redial. The default is 3.
Turns off the volume of the line monitor.
Sets the volume of the line monitor to Min.
Sets the volume of the line monitor to Middle.
Sets the volume of the line monitor to Max.
Turns off the volume of the ring tone.
Sets the volume of the ring tone to Min.
Sets the volume of the ring tone to Middle.
Sets the volume of the ring tone to Max.
Uses PSTN.
Uses PBX.
Uses tone dialing.
Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.
Using the Operator Panel Menus and Keypad
269