Table of Contents
Advertisement
Ghosting
Problem
The printed result has ghosting.
Light-Induced Fatigue
Problem
The printed result has
light-induced fatigue pattern.
Action
If the type of the ghosting is positive ghost:
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 385
• "Installing a Drum Cartridge" on page 388
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
If the type of the ghosting is negative ghost:
Verify that the print media recommended for the printer is being used.
If you are using non-recommended print media, use the print media recommended
for the printer.
See also:
• "Ghost Control" on page 287
If the problem is solved, adjust the transfer bias.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Adjust the transfer bias.
1
On the operator panel, press the
Maintenance → Adjust Transfer Unit.
2
Adjust the setting for the type of print media being used.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Action
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 385
• "Installing a Drum Cartridge" on page 388
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
(System) button and select Admin Menu →
Troubleshooting
351
Hide quick links:
Advertisement
Table of Contents
