Removing The Fusing Unit - Fuji Xerox DocuPrint M355 df User Manual

Removing the Fusing Unit

1
Turn off the printer, and wait for 40 minutes.
IMPORTANT:
• Note that the data in the memory are cleared when the printer is turned off.
2
Pull the rear door handle on the rear of the printer to open the rear door.
3
Raise the two gray levers on the both sides of the fusing unit to unlock.
4
Grasp the grips on both sides of the fusing unit placing thumb on the knurling, and then pull out the unit.
391
Maintenance