Alert Tone - Fuji Xerox DocuPrint M355 df User Manual

• Alert Tone

Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Panel Select Tone Off
Panel Alert Tone
Machine Ready
Tone
Copy Job Tone
Non-Copy Job
Tone
Fault Tone
Alert Tone
Out of Paper
Low Toner
Auto Clear Alert
*
Does not emit a tone when the operator panel entry is correct.
Soft Emits a tone when the operator panel entry is correct.
Normal
Loud
*
Off Does not emit a tone when the operator panel entry is incorrect.
Soft Emits a tone when the operator panel entry is incorrect.
Normal
Loud
Off Does not emit a tone when the printer is ready to process a job.
Soft Emits a tone when the printer is ready to process a job.
*
Normal
Loud
Off Does not emit a tone when a copy job is complete.
Soft Emits a tone when a copy job is complete.
*
Normal
Loud
Off Does not emit a tone when a job other than a copy job is complete.
Soft Emits a tone when a job other than a copy job is complete.
*
Normal
Loud
Off Does not emit a tone when a job ends abnormally.
Soft Emits a tone when a job ends abnormally.
*
Normal
Loud
Off Does not emit a tone when a problem occurs.
Soft Emits a tone when a problem occurs.
*
Normal
Loud
Off Does not emit a tone when the printer runs out of paper.
Soft Emits a tone when the printer runs out of paper.
*
Normal
Loud
Off Does not emit a tone when a toner is low.
Soft Emits a tone when a toner is low.
*
Normal
Loud
*
Off Does not emit a tone 5 seconds before the printer performs auto
clear.
Soft Emits a tone 5 seconds before the printer performs auto clear.
Normal
Loud
Using the Operator Panel Menus and Keypad
277