Bypass Tray - Fuji Xerox DocuPrint M355 df User Manual

Bypass Tray

Purpose:
To specify the paper loaded in the bypass tray.
Values:
Paper Size
mm series
inch series
Paper Type
*
Use Driver Settings
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
Monarch Env. (3.9 x 7.5")
DL Env. (110 x 220 mm)
C5 Env. (162 x 229 mm)
#10 Env. (4.1 x 9.5")
New Custom Size Portrait(Y)
Landscape(X)
*
Use Driver Settings
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x 10.5")
Monarch Env. (3.9 x 7.5")
DL Env. (110 x 220 mm)
C5 Env. (162 x 229 mm)
#10 Env. (4.1 x 9.5")
New Custom Size Portrait(Y)
Landscape(X)
*
Plain
Plain Thick
Lightweight Cardstock
Heavyweight Cardstock
Envelope
Labels
Letterhead
Hole Punched
Colored
Other Type
297 mm* Specifies the
length of the
127 - 355 mm
custom size paper.
210 mm* Specifies the width
of the custom size
77 - 215 mm
paper.
11.7 inch* Specifies the
length of the
5.0-14.0 inches
custom size paper.
8.3 inch* Specifies the width
of the custom size
3.0-8.5 inches
paper.
Using the Operator Panel Menus and Keypad
303