Preparing A Document - Fuji Xerox DocuPrint M355 df User Manual

Preparing a Document

You can use the document glass or the Duplex Automatic Document Feeder (DADF) to load an original document
for copying, scanning, and sending a fax. You can load up to 50 sheets of 64 gsm documents for one job using the
DADF or one sheet at a time using the document glass.
IMPORTANT:
• Avoid loading documents that are smaller than 139.7 mm by 139.7 mm (5.5 in. by 5.5 in.) or larger than 215.9 mm by 355.6
mm (8.5 in. by 14 in.), different sizes or weights together, or booklets, pamphlets, transparencies, or documents having other
unusual characteristics in the DADF.
• Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased paper, curled or rolled
paper, torn paper, photographs, or transparencies cannot be used in the DADF.
• Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials such as glue, ink and
correcting fluid in the DADF.
NOTE:
• To get the best scan quality, especially for gray scale images, use the document glass instead of the DADF.
166
Copying