Scanning To A Usb Storage Device; Types Of A Usb Storage Device; Procedures - Fuji Xerox DocuPrint M355 df User Manual

Scanning to a USB Storage Device

 Types of a USB Storage Device
You can use a USB storage device with the following interfaces:
• USB 1.1
• USB 2.0
The USB storage device must be formatted in FAT file systems (FAT16, FAT32, or VFAT) before inserting the
memory device into the front USB port of the printer.
NOTE:
• If the USB storage device is formatted in a file system other than above, the printer may not recognize that the USB storage
device is attached.
• A USB storage device with authentication feature and some brands of USB storage devices cannot be used with this printer.
 Procedures
To store the scanned images to a USB storage device:
NOTE:
• If you insert a USB storage device to the front USB port first, the USB Memory screen may appear. In this case, select Scan
to USB Memory, and proceed to step 5.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 169
• "Making Copies From the Document Glass" on page 167
2
Press the (Scan) button.
3
Insert a USB storage device into the front USB port of the printer.
4
Select Scan to USBMemory, and then press the
5
If you want to save the scanned data to a folder on the USB storage device, select the desired folder to save
the scanned data, and then press the
NOTE:
• The default saving location is the root directory of the USB storage device.
• You can select any folder in the USB storage device but cannot create a new folder in this step. You should always
create a new folder before connecting the memory to the printer.
button.
button.
209
Scanning