Init Print Meter; Reset Transfer Unit; Reset Fusing Unit; Clear Job History - Fuji Xerox DocuPrint M355 df User Manual

• Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory for system parameters, Address Book data for fax, or Address Book data
for scan. After executing this function and rebooting the printer, the menu parameters or data, except the parameters
for the network, are reset to their factory default values.
Values:
User Fax Section
User Scan
Section
System Section
See also:
• "Resetting to Factory Defaults" on page 313

• Init Print Meter

Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Values:
*
Cancel
Start

• Reset Transfer Unit

Purpose:
To initialize the transfer unit counter.
Values:
*
Cancel
Start

• Reset Fusing Unit

Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Values:
*
Cancel
Start

• Clear Job History

Purpose:
To clear the job history of all finished jobs.
Values:
*
Cancel
Start
*
Cancel Does not initialize the fax number entries in the Address Book.
Start Initializes the fax number entries in the Address Book.
*
Cancel Does not initialize the e-mail and server address entries in the
Address Book.
Start Initializes the e-mail and server address entries in the Address Book.
*
Cancel Does not initialize the system parameters.
Start Initializes the system parameters.
Does not initialize the print meter.
Initializes the print meter.
Does not initialize the transfer unit counter.
Initializes the transfer unit counter.
Does not initialize the fusing unit counter.
Initializes the fusing unit counter.
Does not clear the job history.
Clears the job history.
Using the Operator Panel Menus and Keypad
285