Sending a Fax
You can fax data from your printer.
This section includes:
• "Loading an Original Document" on page 225
• "Adjusting the Document Resolution" on page 227
• "Adjusting the Document Contrast" on page 227
• "Inserting a Pause" on page 227
• "Sending a Fax From Memory" on page 228
• "Sending a Fax Manually" on page 229
• "Confirming Transmissions" on page 230
• "Automatic Redialing" on page 230
Loading an Original Document
You can use the DADF or the document glass to load an original document for faxing.
To Fax a Document Using the DADF
Using the duplex automatic document feeder (DADF), you can load up to 50 sheets of 64 gsm paper at a time.
NOTE:
•
To get the best scan quality, especially for gray scale images, use the document glass instead of the DADF.
•
You cannot load the following documents in the DADF. Be sure to place them on the document glass.
Curled originals
Lightweight originals
Cut and paste originals
1
Place the document(s) face up on the DADF with the top edge of the documents in first. Then adjust the
document guides to the correct document size.
2
Adjust the document resolution.
See also:
• "Adjusting the Document Resolution" on page 227
Pre-punched paper
Folded, creased or torn originals
Carbon paper
225
Faxing