• Letterhead 2-Sided Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
*
Disable
Enable
• Report 2-Sided Mode
Purpose:
To specify to print reports on both sides a sheet of paper.
Values:
*
1-Sided
2-Sided
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
*
On
• Server Address Book
Purpose:
To specify whether to search the e-mail addresses from the Address Book for the LDAP server.
Values:
*
Off
On
NOTE:
•
You can search the e-mail addresses only from the Address Book that is local when Server Address Book is set to Off.
• Server Phone Book
Purpose:
To specify whether to search the phone numbers from the Phone Book for the LDAP server.
Values:
*
Off
On
NOTE:
•
You can search the phone numbers only from the local Phone Book when Server Phone Book is set to Off.
Does not print on both sides of letterhead.
Prints on both sides of letterhead.
Prints reports on one side of a sheet of paper.
Prints reports on both sides of a sheet of paper.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Does not search the e-mail addresses from the Address Book for the
LDAP server.
Searches the e-mail addresses from the Address Book for the LDAP
server.
Does not search the phone numbers from the Phone Book for the
LDAP server.
Searches the phone numbers from the Phone Book for the LDAP
server.
Using the Operator Panel Menus and Keypad
281