• Redial Interval
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1 minute.
• Junk Fax Filter
Purpose:
To reject unwanted faxes by accepting faxes only from the fax numbers registered in the Fax Address Book.
Values:
*
Off
On
• Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
*
Off
On
• Remote Rcv Tone
Purpose:
To specify the tone in two digits to start Remote Receive.
• Send Header
Purpose:
To print the information of the sender on the header of the faxes.
Values:
Off
*
On
• Company Name
Purpose:
To set the sender name to be printed on the header on faxes.
• Your Fax Number
Purpose:
To set the fax number of the printer, which will be printed on the header of a fax message.
NOTE:
•
Ensure to specify Your Fax Number before using Junk Fax Filter.
270
Using the Operator Panel Menus and Keypad
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers.
Does not receive a fax by pressing a remote receive code on the
external telephone.
Receives a fax by pressing a remote receive code on the external
telephone.
'
Does not print the sender
s information on the header of faxes.
'
Prints the sender
s information on the header of faxes.