Sent Fax Fwd; Fwd. Settings Num; Prefix Dial Num; Discard Size - Fuji Xerox DocuPrint M355 df User Manual

• Sent Fax Fwd

Purpose:
To set whether to forward incoming faxes to a specified destination.
Values:
*
Off
Forward
Print & Forward

• Fwd. Settings Num

Purpose:
To enter the fax number of the destination to which incoming faxes will be forwarded.
• Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
*
Off
On

• Prefix Dial Num

Purpose:
To set a prefix dial number of up to five digits. This number dials before any auto dial number is started. It is useful
for accessing the Private Automatic Branch Exchange (PABX).

• Discard Size

Purpose:
To set the printer to discard images or any text at the bottom of a fax page when the entire page does not fit the
output paper.
Values:
*
Off
On
Auto Reduction
• ECM
Purpose:
To set whether to enable or disable the Error Correction Mode (ECM). To use the ECM, the remote machines must
also support the ECM.
Values:
Off
*
On
272
Using the Operator Panel Menus and Keypad
Does not forward incoming faxes.
Forwards incoming faxes to a specified destination. Prints incoming
faxes if an error occurs during the transfer.
Prints incoming faxes and also forwards them to a specified
destination.
Does not set a prefix dial number.
Sets a prefix dial number.
Prints excess images or text at the bottom of a fax page without
discarding it.
Discards any excess images or text.
Automatically reduces a fax page to fit it onto the appropriate paper
size.
Disables the ECM.
Enables the ECM.