Dynamic Methods Of Setting The Printer's Ip Address - Fuji Xerox DocuPrint M355 df User Manual

 Dynamic Methods of Setting the Printer's IP Address
There are two protocols available for dynamically setting the printer's IP address:
• DHCP (enabled by default)
• AutoIP
You can turn on/off both protocols using the operator panel or CentreWare Internet Services.
NOTE:
• You can print a report that includes the printer's IP address. On the operator panel, press the
Report / List, press the
the System Settings page.
Using the Operator Panel
To turn on/off either the DHCP or AutoIP protocol:
1
On the operator panel, press the
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select TCP/IP, and then press the
5
Select IPv4, and then press the
6
Select Get IP Address, and then press the
7
Select DHCP / AutoIP, and then press the
Using CentreWare Internet Services
To turn on/off either the DHCP or AutoIP protocol:
1
Launch your web browser.
2
Enter the IP address in the browser's address field, and then press the Enter key.
3
Select Properties.
4
Select the Protocol Settings folder on the left navigation panel.
5
Select TCP/IP.
6
In the Get IP Address field, select the DHCP / Autonet option.
7
Click the Apply button.
82
Printer Connection and Software Installation
button, select System Settings, and then press the
(System) button.
button.
button.
button.
button.
button.
button.
(System) button, select
button. The IP address is listed on