Usb Settings; Fax Transmit; Fax Broadcast; Fax Protocol - Fuji Xerox DocuPrint M355 df User Manual

• Fax Transmit

Purpose:
To set whether to print a transmission result after a fax transmission.
Values:
Print Always
*
Print On Error
Print Disable

• Fax Broadcast

Purpose:
To set whether to print a broadcast result after a fax broadcast to multiple destinations.
Values:
*
Print Always
Print On Error
Print Disable

• Fax Protocol

Purpose:
To set whether to print the protocol monitor report, which helps you identify the cause of a communication problem.
Values:
Print Always
Print On Error
*
Print Disable

USB Settings

Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.

• Port Status

NOTE:
• Port Status feature is available only for the USB port on the rear of the printer.
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
Disable
*
Enable
274
Using the Operator Panel Menus and Keypad
Prints a transmission report after every fax transmission.
Prints a transmission report only when an error occurs.
Does not print a transmission report after a fax transmission.
Prints a broadcast report after every fax broadcast.
Prints a broadcast report only when an error occurs.
Does not print a broadcast report after a fax broadcast to multiple
destinations.
Prints a protocol monitor report after every fax transmission.
Prints a protocol monitor report only when an error occurs.
Does not print a protocol monitor report.
Disables the USB port.
Enables the USB port.