Sending A Delayed Fax - Fuji Xerox DocuPrint CM215 Series User Manual

Sending a Delayed Fax

The Delayed Start mode can be used to save scanned documents for transmission at a specified time
to take advantage of lower long distance rates.
1
Load the document(s) facing up with top edge in first into the
facing down on the
See also:
• "Loading an Original Document on the ADF" on page 244
• "Loading an Original Document on the Document Glass" on page 245
2
Press the (Fax) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 246
• "Lighter/Darker" on page 248
4
Select Delayed Start, and then press the
5
Select On, and then press the
6
Enter the start time using the
and then press the
7
Select Fax to, and then press the
8
Select Keypad, and then press the
9
Enter the fax number of the remote fax machine by one of the following way.
• Select Fax to, and then press the button. Select Keypad, and then press the
Enter the fax number of the remote fax machine using the
button.
• Press the One-touch button, and then press the
• Press the
button, and then press the button.
See also:
• "Automatic Dialing" on page 271
10
Press the (Start) button.
Once the Delayed Start
memory and sends them at the specified time. After faxing in the
data in the memory will be cleared.
254 Faxing (DocuPrint CM215 f/CM215 fw Only)
document glass and close the
button.
numeric keypad
button.
(Address Book) button, select All Entries, Group Dial, or Search using the
mode is activated, your printer stores all the documents to be faxed to its
document
button.
or press the
button.
button.
numeric
button.
Delayed Start
ADF or place a single document
cover.
or button to select the start time,
keypad, and then press the
mode is complete, the
button.