Cli Commands - HP ProLiant DL140 User Manual

16 HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide
Option
System Event Log
Network Settings
PET configuration
User Management

CLI commands

CLI commands are entered at the command prompt that displays after a
successful login to the remote management processor. For more information on
logging in to the remote management processor, refer to the "Logging in to the
remote management processor" section.
The following table lists and describes the CLI commands. The commands are
described in further detail in the following sections. Single letter abbreviations
can be used rather than the entire command word. For example, c can be used
rather than entering Changepassword. CLI commands are not case-sensitive.
Command
C[hangePassword]
P[ower]
P[ower] off
I[pmicommand]
<command data>,
where <command
data> is a
supported IPMI
command
SEN[sorStatus]
SD[RRead]
SEL[Read]
Description
Displays the system event log
Accesses the network parameter settings
screen
Accesses the PET destinations and alert
policy table
Accesses the user configuration screen
Action
Changes password for Administrator
account
Displays the server power status
Powers off the server
Executes an IPMI command
Displays the system sensor status
Displays the Sensor Data Record
Displays the system event log