Incoming Ringing / Auto Attendant / Courtesy Service
If a PRI Access and no backup lines are installed then the Incoming Ringing is programmed
as follows:
•
From the Programming Extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until 'System Programming' is displayed.
•
Select 'System Programming'.
•
Enter the System Programming Password
•
Select 'Lines'.
•
Select 'Incoming Ringing' option.
•
The menu updates to show only the 'PRI' option
•
Select 'PRI Access'
•
Select 'Day', 'Night', or 'Day and Night'.
•
If the line is to ring an individual extension, select 'Extension' and then the required
extension. If the line is to be presented to a group, select 'Group' and then the
required group.
•
Auto Attendant or Courtesy Service can also be associated with the call
Press the Hands-free key to finish programming.
The default is that all lines ring group 1 in both day and night modes.
If the switch is equipped with a PRI Access and some Backup Lines are equipped then
Incoming ringing is programmed as follows:
•
From the Programming Extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until 'System Programming' is displayed.
•
Select 'System Programming'.
•
Enter the System Programming Password and select 'Lines'.
•
Select 'Incoming Ringing' option.
•
Select either 'PRI Access' or Line 31 - Line 34 or Access 1 - 2
Continue the programming as described above
In the case of PRI the B-channels cannot be separated so the full PRI is programmed to ring
an extension or group. It can also be programmed for Courtesy or Auto Attendant service.
Note: Lines 31 - 34 or Access 1 - 2 are the backup lines. Only those equipped are displayed.
No D-Channel backup is provided for the PRI Line.
Note:
Mitel 3000 Australia Administrator's Manual
121