Mitel 3000 Australia Administrator's Manual
PROGRAMMING ADDITIONAL SYSTEM
OPTIONS
USING THE DOOR INTERCOM
You can equip your Mitel 3000 with a Door Intercom. The Door Intercom has a button which,
when pressed, rings at programmed extensions, and has a microphone/speaker for
communication. With a Door Intercom fitted in your reception area, anyone visiting your
premises can call when they arrive and you can speak to them before you let them in.
Your Mitel 3000 also features a Doorstrike relay output, which can be used to operate a
Doorstrike mechanism, to allow you open the door from your extension. You must purchase
the Doorstrike mechanism yourself and arrange for a qualified electrician to install it.
To set up a Door Intercom on your System
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'System'
•
Select 'Door Intercom
•
Select 'Door Extension equipped'
Press the Hands-free Key to finish programming.
To set up which Extensions the Door Intercom will ring
You can choose which Extensions will ring upon calling from the Door Extension, for either Day
or 'Night Service'.
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Lines'
•
Select 'Incoming Ringing'
•
Select 'Door Intercom.
•
Select 'Day', Night', or 'Day and Night'
•
If the Door Intercom is to ring an individual extension select 'Extension' and then the
required extension. If the Line is to be presented to a group select Group and then
the required Group.
•
The default is that the Door Intercom rings Group 1 in both Day and Night Modes.
Press the Hands-free Key to finish programming.
88