Answering a Door Intercom call
You can answer a Door Intercom call if your extension is programmed to ring when someone
calls at the Door Intercom.
To answer a 'Door Intercom' call, lift the Handset and speak. There is no code to dial.
Note: An Extension cannot make a call to a Door Intercom.
To open a door using the Doorstrike
When your extension is ringing with a Door Intercom call, and you have a Doorstrike
mechanism installed, the option 'Open the door' will be displayed
Select 'Open the Door'. The Doorstrike relay will operate and the call to the Door Intercom
will be disconnected.
From a standard telephone, the code is R731 if you are on a call, and 731 if you are not on a
call.
To program which extensions can operate the Doorstrike
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Extensions'
•
Press the Scroll Down Key ( ) until 'Open door restriction' is displayed
•
Select 'Open door restriction'
•
Select which extensions are restricted from opening the door. The extensions
restricted from operating the Doorstrike will be indicated with a ♦.
Press the Hands-free Key to finish programming.
Note: By Default, all extensions are unable to open the door.
To program how long the Door remains unlocked
You can program how long the door remains unlocked to suit your requirements.
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'System'
•
Press the Scroll Down Key ( ) until 'Timers' is displayed
•
Select 'Timers'
•
Press the Scroll Down Key ( ) until 'Open the Door' is displayed
•
Select 'Open the Door'
•
Enter the new time between 01 and 30 seconds
•
Press 'Confirm'
Press the Hands-free Key to finish programming.
Mitel 3000 Australia Administrator's Manual
89