Naming Analogue Lines; Turning On The 'Line Name' Feature - Mitel 3000 Administrator's Manual

Naming Analogue lines

This feature allows a PSTN line to present a name of the line to an extension. The name will
be presented in a similar format to the Tele-secretary feature in ISDN. So when a call is
presented to an extension on that line the top line of the display will read 'Call for XXX', where
XXX is the name Programmed for that line.
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Lines'
•
Press the Scroll Down Key ( ) until 'PSTN programming' is displayed
•
Select 'PSTN programming'
•
Press the Scroll Down Key ( ) until 'Line Name' is displayed
•
Select 'Line Name'. All the available Analogue lines will appear on the screen
•
Select the required line and enter the name as required.
Press the speakerphone key when finished.

Turning on the 'Line Name' feature

•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'System'
•
Press the Scroll Down Key ( ) until 'Present Line Name' is displayed
•
Select 'Present Line Name'. A ♦ diamond indicates the feature is enabled.
Press the speakerphone key when finished.
Mitel 3000 Australia Administrator's Manual
107