Incoming Ringing - Mitel 1000 Owner's Manual

7. PABX Configuration using the web interface
Your PABX (Phone System) can be completely configured via the
web management system.
The web management Welcome page contain a link to Basic PABX
Settings, which are the configuration options that the user will most
likely wish to change.
The Basic PABX Settings are:

Incoming Ringing

Extension Names
Outgoing Restriction
Extension Class of Service
Cordless Registration
Line Forwarding
Instruction for setting these basic options are given below.
Additional instructions are also included for all other PABX
configuration options. These may be accessed by selecting PABX
Configuration from the main menu and then using the sub-menu
below to access individual functions.
Some programming changes require the system to be restarted. A
prompt, shown below, will appear on the left-hand side of the
screen. The Restart must be selected before you exit to ensure the
settings take effect.
Incoming Ringing
By associating lines with individual extensions, you can have lines
ringing different extensions in Day and Night modes.
For example, in DAY mode, all calls on line1 might ring all phones,
but in NIGHT mode all calls on line 1 might be set to only ring
extension 20.
Also, in both DAY & NIGHT modes, all calls on IP Trunk (VoIP) 1
might be set to ring on extension 23 only.
94