Outgoing Groups; Outgoing Groups When Pri Is Programmed; Lcr Codes; Lcr Programming When Pri Is Programmed - Mitel 3000 Administrator's Manual

Outgoing Groups

Outgoing Groups when PRI is programmed

In this case the B channels can not be separated and therefore the PRI Access is presented as
an individual option and 'Outgoing Groups' are programmed as follows:
•
From the Programming Extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until 'System Programming' is displayed.
•
Select 'System Programming'.
•
Enter the System Programming Password
•
Select 'Lines'.
•
Press the Scroll Down key ( ) until 'Outgoing Groups' is displayed.
•
Select 'Outgoing Groups' option.
•
Select the group you wish to set up. Up to 11 groups can be set up, each with a
corresponding access code, 0 or 760 - 769
•
Select either the 'PRI' or the back up lines (Line 31 - Line 34 or Access 1- 2)
•
If PRI is selected all the available B-channels are placed in the selected group.
•
In default the PRI Access and additional Lines are all in Group 1, selected by dialling
0.

LCR Codes

LCR programming when PRI is programmed

When the option to select lines is presented the menu is updated to the 'PRI Access' and the
back up lines equipped. LCR Codes are programmed as follows:
•
From the Programming Extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until 'System Programming' is displayed.
•
Select 'System Programming'.
•
Enter the System Programming Password and select 'Lines'.
•
Scroll Down and select 'LCR Codes'.
•
Select 'LCR On' to activate the feature.
•
Enter in a code index (01-50).
•
Enter an input code (Up to 5 digits). This is the code dialled by the user.
•
Enter an output code (Up to 7 digits). This is the code that will be inserted before the
telephone number that the user dials. This code can be used to select a specific
telephone company.
•
Select the preferred or exclusive option.
•
If 'Exclusive' is selected, the calls can only be sent on the lines selected.
•
If 'Preferred' is selected, the calls will be routed on the lines selected if they are free.
If these lines are not available the call will be dialled on another free line. In this
case, the output code is not dialled.
Press the speakerphone key to finish programming.
Note: If PRI is selected the LCR programming applies to all B-channels available.
Lines 31-34 or Access 1-2 are the backup lines if equipped.
Mitel 3000 Australia Administrator's Manual
123