External Diversion Options; To Move A Faulty Extension; To Change Ringing From 50 To 25 Hz; Reverse Cadence - Mitel 3000 Administrator's Manual

External diversion Options

This allows you to decide if External callers or External and internal Callers to your extension
are diverted externally if you have set an external divert. It also allows extensions to be
prohibited from activating an external diversion.
•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Extensions'
•
Press the Scroll Down Key ( ) until 'External Diversion' is displayed
•
Select 'External diversion'
•
Select 'No trunk to trunk calls'
•
Select the extensions that are not allowed to activate an external diversion or set up
trunk to trunk calls.
•
If both internal and external calls are to be diverted select 'All calls'.
•
If external calls only are to be diverted select 'External calls only'

To move a faulty extension

If an extension interface becomes faulty, you can swap its extension programming to a
different extension. Calls for the faulty extension will be routed to the new extension.
•
From the Programming Extension, press the PROGRAM Key
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Extensions'
•
Press the Scroll Down Key ( ) until 'Port Swapping' is displayed
•
Select 'Port swapping'
•
Select the faulty extension from the extension list
•
Select the new extension from the extension list.
Press the Hands-free Key to finish programming.

To Change ringing from 50 to 25 Hz

This option allows the ringing frequency to be changed from the default 50Hz to 25 Hz on
individual extensions
•
From the Programming Extension, press the PROGRAM Key
•
Select 'System programming'
•
Enter the System Programming Password
•
Select 'Extensions'
•
Press the Scroll Down Key ( ) until '25 Hz ringing' is displayed
•
Select '25 Hz ringing'
•
Select the extensions to ring at 25 Hz
•
Press the speakerphone key to finish programming
Note: The default is that all extensions are set for 50 Hz ringing.

Reverse cadence

The external and Internal ringing cadences can be interchanged on an extension by extension
basis
Mitel 3000 Australia Administrator's Manual
101